Category Archives: Mazda 3
Mazda 3 Headlight Replacement Cost And Instructions
How much does it cost?
The replacement cost for a Mazda 3 headlight bulb is around $15 for the halogen bulb and $40 for the HID bulb and for the headlight assembly it is between $ 110 to $ 680. These costs vary depending on your year model, where you’re located and other things like CAPA certification, SAE compliance, warranty period, quality of materials, finish, and whether the assembly comes with or without bulbs or even a wiring harness. The halogen assembly is generally on the lower end of the price range while the Xenon assembly is on the higher end.
How much time does it take?
Replacing the bulb shouldn’t take more than 5 to 10 minutes. The assembly could take longer though, about half an hour.
Model Year | Headlight Assembly Cost | ||
---|---|---|---|
2004 – 2006 | $115 – $680 | ||
2007 – 2009 | $116 – $250 | ||
2010 – 2013 | $112 – $340 | ||
2014 – 2015 | $180 – $500 |
Instructions To Replace The Headlight Bulb For Mazda 3:
1. Pull the lever near the steering column to open the hood
2. Remove the plastic cover and then remove the connector
3. Remove the rubber seal to reveal the metal retainer clip
4. Now release the clip by pushing it in and to the side
5. Now take out the old bulb and insert the new one and fasten the clip by pushing it down and towards the bulb
6. Finally put the seal, connector and plastic cover back and close the hood.
Instructions To Replace The Headlight Assembly For Mazda 3:
1. First remove the plastic clips and metal screws that hold the splash guard to the front bumper. These screws and clips are located at the underside as well as under the wheel arches and at the top. Then, pull back the fender and remove the bolt inside.
2. Now, behind the grille you will find two clips that clip in to the bumper bar. Pull up and out on those and the bumper cover should come out.
3. Remove the ambient temperature sensor from its mounting bracket with a pair of pliers and also disconnect the fog light wire and dummy wires.
4. Remove the three headlight bolts, two on the lower side of the headlight and one at the top. Additionally, there is a clip at the top which has to be removed.
5. Finally, unclip the headlight wires and the assembly should now come free.
6. The main headlight bulb and the right bulb can be changed without removing the assembly but to change the corner bulb, you would probably need to remove the assembly.
7. Now, using a screwdriver remove the screw connecting the headlight and the mounting bracket and pull on the ends to unlock them.
8. Fix the mounting bracket onto the new headlight and connect back the wire harnesses.
9. Put the new headlight in place and screw back the bolts and clips.
10. Finally, reconnect the temperature sensor and dummy wires and put the bumper cover in place with all the clips and screws back in.
Mazda 3 Clutch Replacement Cost
How much does it cost?
The replacement cost for a Mazda 3 clutch varies between $900 to $1500 on average depending on your year model, where you’re located and whether you get it done at a dealership or at a local mechanic. . The suggested cost here includes replacement of the clutch disc, pressure plate, throwout bearing, pilot bearing, resurfacing of the flywheel and labor.
How much time does it take?
The time taken to replace the clutch usually takes 4 to 5 hours for a skilled mechanic.
How much do the parts cost?
There are clutch kits available for the Mazda 3 which will cost anywhere between $210 to $415 depending on the brand, the year model, and what the kit comes equipped with, for example a kit with a spring hub would cost more than a kit with a rigid hub, some kits may have heavy duty pressure plates with better friction for street racing or some kits may include a flywheel as well as master and slave cylinders whereas others may not. Exedy and Luk are two well known brands that manufacture oem clutch kits.
Can I replace the clutch on my own?
There are videos you can watch on youtube which show you how to replace the clutch on a Mazda 3 from which you can assess yourself whether it’s a job you have the time for and can handle or whether you would prefer to give it to a mechanic.
Model Year | Clutch Kit Cost | Total Replacement Cost(parts + Labor) | |
---|---|---|---|
Local Mechanic | Dealership | ||
2004 | $210 – $250 | $900 – $1050 | $1100 – $1500 |
2005 | $210 – $250 | $900 – $1050 | $1100 – $1500 |
2006 | $210 – $250 | $900 – $1050 | $1100 – $1500 |
2007 | $210 – $250 | $900 – $1050 | $1100 – $1500 |
2008 | $250 – $450 | $950 – $1100 | $1150 – $1550 |
2009 | $250 – $450 | $950 – $1100 | $1150 – $1550 |
2010 | $315 – $415 | $1000 – $1150 | $1200 – $1600 |
2011 | $260 – $415 | $950 – $1100 | $1150 – $1600 |
2012 | $260 | $900 – $1050 | $1100 – $1500 |